Roller shutters have many applications, including doors for vans, garages, kitchens, schools, prisons and warehouses. In some parts of the world, roller shutters are subsidised by local governments. In areas that are frequently exposed to inclement weather, roller shutters are used as a method of insulation and can protect windows against hail damage.
Types of slats
Types and operation
Describes the type where the roller shutter box is fixed to the exterior of the building facade.
Where the roller shutter box is built into the lintel above the window.
A roller shutter and window combined as a single unit.
A roller shutter with laths that tilt, similar to an external venetian blind.
With gear drive from the shutter roller traced through the building facade to a universal joint on the room side that is operated by a cranked winding handle.
A tape drive around a flange on the roller is traced through the building facade with pulley guides to an inertia reel on the room side.
With a tubular motor fitted within the roller. External motor.
A roller shutter is a complex piece of machinery, and, when kept in good working order, provides a convenient, secure and cost-effective solution for any business.
To make sure that roller shutters are able to provide years and years of safe and efficient service, it’s important to know the rules and regulations surrounding maintenance and repairs of both Industrial and commercial roller shutters.
Why are maintenance regulations necessary?
Roller shutters are classed as machinery, and can be prone to failure over time, especially with regular or excessive use. Accidents involving roller shutters, whether at home or in a commercial/industrial setting can be incredibly dangerous, so regulations are in place to avoid this eventuality as far as possible. A key part of this is focused on maintenance. Looking after a roller shutter – and checking to see that it operates as it should at scheduled intervals – is key to identifying any potential problems and avoiding risk.
Regulation 5 of the Workplace (Health Safety and Welfare) Regulations 1992
Under this regulation, any powered door – including roller shutters – are to be “maintained in an efficient state” and are “subject to a suitable system of maintenance”.
Looking further into this, the regulation states that potentially dangerous equipment should be: “checked at regular intervals, as appropriate, by inspection, testing, adjustment, lubrication, repair and cleaning.”
The regularity of these checks aren’t specified. Instead, they are decided depending on the machine in question, as well as how much it is used, where it installed and according to manufacturer’s guidelines. When purchasing a roller shutter, talk to your supplier for advice on a suitable maintenance schedule specific to you and your business.
Responding to faults
Dangerous faults which endanger personnel should be attended to immediately. Safety devices dedicated to force limitation or obstruction detection may fail, and this causes the roller shutter to become a severe hazard to workers. In these cases, the fault should be identified, the door disconnected and, and repairs made as quickly as possible. The door should remain out of use until a professional has inspected the fault, made the necessary repairs and tested the door to ensure that is can again be operated safely and reliably.
When a fault occurs which does not pose a serious hazard, but impedes the operation of the door – a broken control switch, for example – you can take the door out of service, and arrange for an inspection and repairs to be made at a later date. However, in an industrial or commercial setting, faults will likely be better rectified as soon as possible, even if they aren’t immediately dangerous, so as to ensure a swift return to normal operation in the premises.
With +10 years of experience you can be 100% sure that you are in good hands.
We collaborate with the biggest product suppliers on the market assuring you that you get the best product and services to suit your needs and giving you the best value for the money complemented with an excellent customer service.
We are P.A.S
“Experience you can trust”
A roller shutter, roller door or door is a type of door or window shutter consisting of many horizontal slats (or sometimes bars or web systems) hinged together. The door is raised to open it and lowered to close it. On large roller shutters doors, the action may be motorised. It provides protection against wind, rain, vandalism and burglary attempts.
We also offer repairs for:
Roller shutters doors, sectional doors, high speed doors, dock levellers, electric gate, car park automatic barriers , security doors, fire doors, sliding doors, , dock bumpers, dock buffers, parking control, dock shelters, dock seals, trailer plates, wheel guides, vehicle restraint, windows, internal doors, awnings systems, canopy roofs, garage doors, loading bay equipment, pallet racking, shelving, racking protection, safety barrier systems, emergency doors, strip curtains, corner protection, kerbs, front doors, smoking shelters, and much more. Get in touch with us.
INDUSTRIAL | COMMERCIAL | DOMESTIC
Supply | Installation | Service | Repair
Roller Shutters Doors | Sectional Doors | High Speed Doors | Dock Levellers | Electric Gate | Car Park Barriers | Security Doors | Fire Doors | Sliding Doors | Bollards | Vehicle Restraint Systems | Windows Bars | Internal Doors | Awnings Systems | Canopy Roofs | Garage Doors | Loading Bay Equipment | Pallet Racking | Shelving | Racking Protection | Cable Protectors | Hose Ramps | Dock Bumpers | Dock Lights | Parking Control | Safety Signs | Dock Shelters | Dock Seals | Trailer Plates | Wheel Guides | Safety Barrier Systems | Emergency Doors | Strip Curtains | Corner Protection | Kerbs | Front Doors | Bike Racks | Smoking Shelters | Building Services
Pro Access Service 2018 Copyright @ All Rights Reserved
Pro Access Service Ltd Registered in England and Wales CN: 10936237 9 Cannon Street, Wellingborough, United Kingdom, NN8 4DJ